English
DOD
8NOV 8DOT Glow-in-the-Dark Side Dot Inlay Rod 2mm – Fret Marker for Guitar & Bass€18.00
Sold in:
Thailand
Parts and accessories
Pickups, bodies, necks, bridges, pickguards, pots and other guitar replacement parts. Compare dimensions, mounting standards and compatibility before repairs or modifications.
Suhr Guitars
SUHR VINTAGE SINGLE COILS PICKUP MIKE LANDAU STANDARD BRIDGE HOT PARCHMENT SPEDITO GRATIS€139.00
Sold in:
Italy
L.R. Baggs
L.R. Baggs ANTHEM Tru-Mic Technology & ELEMENT PICKUP MIXING + PREAMP PICKUP ACUSTICA PROFESSIONALE SPEDITO GRATIS€299.00
Sold in:
Italy
Seymour Duncan
Seymour Duncan TB-PG1b Pearly Gates Trembkr Ncov SPEDITO GRATIS€164.00
Sold in:
Italy
Fender
Fender Custom Shop Texas Special Stratocaster Pickup Set SPEDITO GRATIS€249.00
Sold in:
Italy
Seymour Duncan
SEYMOUR DUNCAN SSL5 Custom Staggered for Strat Calibrated - white cover SPEDITO GRATIS€95.00
Sold in:
Italy
Seymour Duncan
SEYMOUR DUNCAN SJBJ-1B JR FOR STRATOCASTER CREAM SPEDITO GRATIS€125.00
Sold in:
Italy
Seymour Duncan
Seymour Duncan APH2S Slash Alnico II Pro Zebra Set SPEDITO GRATIS€279.00
Sold in:
Italy
LR Baggs
L.R. BAGGS EAS Element Active System PICKUP SOTTOSELLA PER CHITARRA ACUSTICA CON CONTROLLO DEL VOLUME SPEDITO GRATIS€166.00
Sold in:
Italy
Showing 1 to 24 of 41 results
Guitar parts are a measurement problem first
Replacement components often look standard until the dimensions are compared. A part can be well made and still be wrong for the instrument. Before ordering, record the measurements that control fit: mounting centres, hole diameters, neck-pocket dimensions, scale requirement, shaft size, routing and string spacing.
The category covers Guitar Pick-up, Guitar Necks, Guitar Bodies, bridges, pickguards and passive electronics.
Mechanical parts have several competing standards
A replacement neck needs more than the right number of frets. Scale length, heel dimensions, bolt pattern, tuner-hole diameter, nut width and fingerboard radius all matter. Bodies must match the intended neck, bridge and pickup routing. Bridges add post spacing, string spacing, mounting depth and, for vibrato systems, the dimensions of the cavity and spring hardware.
That is why “Strat-style”, “LP-style” or a brand reference should be treated as a starting point rather than proof of fit.
Electrical parts need a schematic check
Potentiometers commonly used in passive guitars include 250 kΩ and 500 kΩ values, but circuit design varies. Taper, shaft length, split or solid shaft and thread standard affect both electrical behaviour and physical installation. Pickup swaps require the correct footprint and mounting method as well as suitable wiring.
If a part has already been modified, shortened, drilled or rewired, the listing should make that clear. Those changes may be useful for one build and unusable for another.
Used components can be valuable when condition is documented
Used hardware makes sense for discontinued parts, period-correct restorations and custom builds, but small defects matter. Inspect threads, screw heads, contact surfaces, solder joints and moving parts. With electronics, ask whether leads were cut short and whether mounting hardware is included.
A simple measurement sheet before buying is usually more valuable than a long list of brand names. It turns compatibility into something you can verify.
Explore also: guitar pots and knobs, guitar bridges, guitar pickguards, guitar cables and adapters, electric guitars.
From a broad category to a precise comparison
Choosing Parts and accessories requires more than finding two listings with the same label. Compare the complete model code, revision and included equipment because a version made for another instrument, market or production period may use different dimensions, connections or compatible parts. When the listing does not show those details, request photographs of labels and decision-making areas before comparing price.
Use Guitar Pick-up, Guitar Necks, Guitar Bodies, guitar pots and knobs and guitar bridges to confirm that the item belongs in the intended branch. This prevents a complete system, an accessory and a replacement part from being treated as equivalents. The category guides discovery; the individual listing must then establish identity, operation and everything included in the sale.
Information to verify before making contact
A useful description separates observable facts from opinion. Model, dimensions, connectors, power requirements, included components and faults should be stated in a way the buyer can verify. Words such as “professional”, “vintage” or “perfect” do not replace those details and do not establish authenticity, compatibility or value.
For used equipment, ask when the item was tested, which functions were checked and what work it has received. A modification may be useful, but the listing should identify the work, parts and reversibility. Shipping also depends on weight, moving parts, protection and packing: a working item can still be damaged when it is not immobilised and protected correctly.
FAQ
Model families often contain different production years, metric and imperial standards, mounting patterns and routing dimensions. Compatibility should be confirmed with measurements, not just a style name.
Scale length, heel width and depth, bolt pattern, fret count, nut width, tuner-hole diameter and fingerboard radius are the main checks. The intended bridge position must also match the scale.
They can be, especially for discontinued or period-correct parts. Check lead length, soldering, switch or pot operation, shaft condition and whether mounting hardware is included.
Request the exact model code, photographs of wear areas, a test of the main functions and a complete list of included accessories or spare parts. Ask the seller to disclose servicing, modifications and faults rather than inferring them from cosmetic condition alone.